Ductile Iron Custom Saw Cut Plate

From one piece to production quantity, material is saw cut from large billets to your exact dimensional requirements. Simply give us your finish sizes and we will provide you with cut parts guaranteed to clean up to your finish dimensions. We will add from ⅛” to ¼” of machining stock per dimension, depending on the size of the part, which allows you to have a very minimal amount of machining to produce your finished size.

STOCKED SIZE RANGE

  • Cut to your requested dimensions but limited to maximum sizes below.

As-Cast Ductile Iron Billet sizes to cut from:

Specification
(Grade)
Height
(Inches)
Width
(Inches)
Length
(Inches)
Surface Finish
65-45-12 7.750 20.500 72.000 MILLED/2 SIDES
80-55-06 7.750 20.500 72.000 MILLED/2 SIDES
65-45-12 8.000 21.000 72.000 A/C
80-55-06 8.000 21.000 72.000 A/C
65-45-12 13.250 15.250 86.000 A/C
80-55-06 13.750 20.500 86.000 MILLED/2 SIDES
65-45-12 13.750 20.750 54.000 MILLED/2 SIDES
65-45-12 14.000 25.000 83.000 A/C
65-45-12 14.500 21.500 72.000 A/C
80-55-06 14.500 21.500 86.000 A/C
80-55-06X 14.600 24.400 72.000 A/C
65-45-12 14.750 14.750 75.000 A/C
 65-45-12 15.000 17.000 75.000 MILLED/2 SIDES
65-45-12X 15.354 15.354 72.000 A/C
65-45-12 15.500 17.500 75.000 A/C
65-45-12 15.500 23.500 72.000 MILLED/2 SIDES
65-45-12 16.000 24.000 72.000 A/C
65-45-12X 16.142 16.142 72.000 A/C
65-45-12X 17.716 17.716 72.000 A/C
65-45-12 18.500 22.000 72.000 A/C
65-45-12 18.750 18.750 72.000 A/C
65-45-12X 20.000 25.600 48.000 A/C
65-45-12X 21.000 21.000 54.000 A/C
Customized Cut Lengths Available. Specialize Cut Length During Quote Process.